(Jiangxi New Materials Co., Ltd.)

Huicong Water Industry Network Working principle of silicon phosphorus crystal: Simply put, it uses chemical methods to change the structure of water molecules to achieve the purpose of scale inhibition. Form a self-repairable protective film on iron pipes to achieve anti-corrosion purposes. It is easy to form insoluble substances such as calcium carbonate and magnesium carbonate on the inner wall of water supply pipes. The polyphosphate in the drinking water treatment agent can react with the above metal ions to form a soluble complex, inhibiting the formation of calcium carbonate and magnesium carbonate, and dispersing into the water, and After the iron ions react, a dynamic protective film is formed on the inner wall of the pipeline to prevent corrosion and scale. Wanjiayuan’s unique silicon phosphorus crystal is an economical and effective water treatment agent used to protect pipes in domestic drinking water and industrial water systems. It uses controlled release technology and its main ingredients are composed of polyphosphate and polysilicate. It is a glass-like ball fired through high-temperature technology.

(Jiangxi New Materials Co., Ltd.)

Silicon phosphorus crystal

Working principle of softened resin: In layman’s terms, softened resin absorbs calcium and magnesium to the resin through ion action when water flows through the resin layer, so that the water flowing out basically does not contain calcium and magnesium ions. Without calcium and magnesium ions, there will be no scaling. Wanjiayuan softening resin process and working requirements: five processes: working (sometimes called water production, the same below), backwashing, salt absorption (regeneration), slow flushing (replacement), and fast flushing. All processes of different softened water equipment are very similar, but due to differences in actual processes or control needs, there may be some additional processes. Any softened water equipment based on sodium ion exchange is developed on the basis of these five processes (among them, fully automatic softened water equipment will add a brine re-injection process).

Comparison of the advantages and disadvantages of silicon phosphorus crystal and softened resin:

Advantages and disadvantages of silicon phosphorus crystal:

1. Limitations of use: Silicon phosphorus crystal needs to be equipped with a special silicon phosphorus crystal dosing tank, and there must be water flow; the anti-corrosion and scale inhibition effect can only be achieved when the concentration of silicon phosphorus crystal in the outflow water reaches 3-5ppm. The score is more than 80. If the water source is still, the effect will be greatly reduced.

2. Time limitation: The concentration of silicon-phosphorus crystal in the effluent will increase with the soaking time, ambient temperature, etc. The drainage process in the middle will change its concentration value. When the concentration is extremely high, the corresponding heavy metals will also increase, and drinking it at this time will be harmful to the human body.

3. Environmental requirements: cannot be used in closed circulation systems. The treated water cannot be heated repeatedly after boiling. It cannot be used for water temperatures exceeding 100 degrees, such as steam boilers.

Advantages of silicon-phosphorus crystal: no electricity, no complicated operations, no waste of water, and low cost.

Editor in charge: Wang Fangli