Complete list of polyurethane catalyst products

Complete list of polyurethane catalyst products

US Gas Product Number Company Product Number Product Introduction

Amine catalyst

DABCO 33LVR A-33 33% triethylenediamine in dipropylene glycol solution, industry standard product.

DABCOR 1027 1027 modified triethylenediamine, used in monoethanol polyester and polyether sole solution systems, can adjust fiber and demoulding time.

DABCO 1028 1028 modified triethylenediamine, used in 1,4-butanediol polyester and polyether sole solution systems, can adjust fiber and demoulding time.

DABCO 8154 8154 is a delayed triethylenediamine catalyst that can improve foam fluidity.

DABCO B16 B16 improves surface cure and is suitable for molding and other self-skinning systems.

DABCO BDMA BDMA reduces brittleness and surface hardening that occurs in high moisture formulations.

DABCO BL-11 A-1 70% bis(dimethylaminoethyl) ether in dipropylene glycol solution, “foaming” catalyst.

DABCO BL-17 BL-17 Bis(dimethylaminoethyl) ether derivative with delayed reaction effect.

DABCO BL-22 BL-22 complex amine has a strong “foaming” effect and can replace BL-11.

DABCO Crystalline Solid Amine Solid triethylenediamine, industry standard product.

DABCO CS-90 CS-90 compound amine has a strong “foaming” effect, improves the foam density gradient and cell opening effect, and can reduce corner breakage of the foam.

DABCO DC-2R DC-2 is a special compound amine, suitable for hard spraying to accelerate curing and has excellent storage stability.

DABCO DMAEE DMAEE is a low-odor surface curing catalyst, shared with 33LV and other major basic catalysts.

DABCO DMDEE DMDEE “foaming” catalyst, especially suitable for one-component sealing foam, is compatible with MDI and does not react.

DABCO DMEA DMEA is a mild and balanced catalyst with a short milky time.

DABCO EG EG gel catalyst, 33% triethylene diamine in ethylene glycol solution, used in shoe ethylene glycol systems.

DABCO NE200 (new) NE200 special low atomization reaction type “foaming” catalyst.

DABCO NE400 (new) NE400 is a low-odor, special low-atomization reaction catalyst for polyester foam.

DABCO NE500 (new) NE500 is a special low-atomization reaction type “gelling” catalyst that can greatly reduce odor and atomization.

DABCO NE600 (new) NE600 is a special low-atomization reaction type “foaming” catalyst that can greatly reduce odor and atomization.

DABCO NE1060 (new) NE1060 is a special low atomization reaction type “gelling” catalyst.

DABCO S-25 S-25 gel catalyst, 25% triethylenediamine, 75% 1,4-butanediol mixture.

DABCO T T is a foaming catalyst with low atomization effect and is used for packaging materials.

DABCO TMR TMR is used in polyisocyanurate (PIR) to accelerate final curing without affecting the opal time.

DABCO TMR-2 TMR-2 is used in polyisocyanurate (PIR), but the reaction is mild and can shorten the demoulding time of rigid foam.

DABCO TMR-3 TMR-3 is used in polyisocyanurate (PIR), but the reaction is the slowest and has a delay effect.

DABCO TMR-4 TMR-4 trimerization catalyst provides excellent fluidity effect.

DABCO TMR-30 DMP-30 Tris(dimethylaminomethyl)-2,4,6-phenol basic trimerization catalyst.

DABCO XDMTM XDM auxiliary catalyst improves skin appearance and cure.

POLYCATR5 PC5 is a strong “foaming” catalyst, an industry standard catalyst for hard foam, which can improve foam fluidity.

POLYCAT8 PC8 dimethylcyclohexylamine, standard catalyst.

POLYCAT9 PC9 tertiary amine, low-odor hard catalyst, can replace dimethylcyclohexylamine, especially suitable for hard spray systems.

POLYCAT12 PC12 is a tertiary amine catalyst with weak reactivity and can increase foam hardness.

POLYCAT17 PC17 balanced, low atomization catalyst, can improve surface curing, especially suitable for products such as headrests.

POLYCAT18 (new) PC-18 special co-catalyst, delays the onset time without affecting the final curing; improves the curing on the board.

POLYCAT33 PC-33 modified dimethylcyclohexylamine, low odor hard catalyst, industrial standard product.

POLYCAT41 PC-41 trimerization catalyst, excellent foaming effect; suitable for various rigid foam systems with high moisture content, can shorten demoulding time.

POLYCAT48 PC48 is a special balanced catalyst that can help improve fluidity and dimensional stability, especially suitable for low-density formulations

Can be used alone or in combination with other catalysts.

POLYCAT58 PC58 Low odor, surface cure catalyst.

POLYCAT77 PC77 is a balanced reaction catalyst with excellent cell opening and surface curing effects, which can enhance the resilience of molded foam.

POLYCAT92 PC92 is a special compound amine that can prolong milky whiteness and reduce sponge rupture loss. It is suitable for low to high density formulas and is especially suitable for slow rebound.

Other countries product number Company product number Product introduction

C-225 C-225 delayed blowout and cross-linking balance to improve fluidity.

PC CAT DBU DBU 1,8 diazabicyclo [5, 4, 0] undecene-7, strong gel catalyst.

SMP SMP compound tertiary amine, increases foam hardness

AS-33 AS-33 modified triethylenediamine, delayed catalyst, molding, box type, soft foam

PCCAT NP15 Np15 bis-(3-dimethylaminopropyl)amino-2-propanolamine, low odor, high resilience

DMBA dimethylbenzylamine

ZF-1 low atomization, foaming catalyst, can replace A-1

TMEDA tetramethylethylenediamine auxiliary catalyst

TMPTA tetramethylpropylenediamine auxiliary catalyst

L-33 low atomization, gel catalyst, performance can replace A-33

NMM N-methylmorpholine, polyurethane fast foaming, open cells

DMP 1,4-dimethylpiperazine, self-crusting

Metal Catalysts

DABCO K-15 K-15 70% potassium octoate in diethylene glycol solution, standard PIR catalyst.

DABCO T9 T9 100% stannous octoate, industry standard tin catalyst.

DABCO T12 T12 dibutyltin dilaurate, suitable for coatings or PU resin.

DABCO 120 120 Tetravalent tin catalyst reacts faster and more stably than T-12.