November 17, 2026 Catalyst Industry Briefing: Bio-based Polyols, Low-Emission Amine Catalysts and DMC Patent Advances

Welcome to the November 17, 2026 edition of the Catalyst Industry Briefing. Today’s edition follows the amine and polyurethane value chain from bio-based polyols and low-VOC formulation work in Wuxi, through low-emission specialty amine catalysts for rigid and molded foam, to a new DMC catalyst patent and DBU/DMAP chemistry for pharmaceutical intermediates. DMAEE (2-[2-(dimethylamino)ethoxy]ethanol) remains a reference point for reactive, low-odour catalysis, and this briefing tracks the technologies reshaping how Polyurethane catalyst systems are specified, qualified and supplied. Supplier advertisements, quotation pages, telephone numbers, instant-messaging contacts and QR codes have been excluded.

Microscopic open-cell polyurethane foam structure with embedded amine catalyst molecules

1. Wuxi Conference Puts Bio-based Polyols and Low-VOC Polyurethane Systems at the Formulation Core

1. Summary: A report published 17 November covers the 9th Waterborne Adhesives Forum and the 17th Polyurethane Adhesives Technology and Information Exchange Conference, held in Wuxi on 9 and 10 November. The two meetings drew close to 200 delegates and 31 technical presentations, with green, low-carbon and high-performance chemistry as the organising theme. Cargill Bioindustrial presented its Priplast series of bio-based dimer-acid polyester polyols, with hydrophobicity, hydrolysis resistance, thermal-oxidative stability and UV resistance said to improve bonding at 85 degrees Celsius and 85 percent relative humidity; bio-based content reaches 100 percent and life-cycle and ISCC PLUS documentation is available. Changhua Chemical described Carnol, a polyol made from carbon dioxide in industrial exhaust, whose carbonate segments supply adhesion, heat and solvent resistance while ether links add hydrolysis resistance and flexibility for synthetic leather, textiles, adhesives and elastomers. Dow’s structural and thermally conductive adhesive platform was framed around lightweighting, full-temperature performance for all-solid-state battery assembly and local-heating disassembly for recycling. Jiangnan University reported intrinsically flame-retardant, heat-aging and antibacterial polyurethane materials from lignin-derived plant polyphenols. Other sessions covered fumed silica reinforcement, one-component waterborne systems with self-crosslinking groups and no pot life, waterborne polyurethane blended with chloroprene latex for sponge bonding, and silica-sol-based soap-free emulsion polymerisation. BASF said it is localising Acronal waterborne acrylic pressure-sensitive adhesives in China, while speakers from East China University of Science and Technology and others set volatile-organic-compound compliance as a hard constraint.

2. Source: Report on the 9th Waterborne Adhesives Forum and 17th Polyurethane Adhesives Technology and Information Exchange Conference, CATIA and 10jqka, 17 Nov 2026. Product and equipment promotions were removed.

3. Editor’s Pick + Reason: The 85 degrees Celsius and 85 percent relative humidity bonding claim for a 100 percent bio-based dimer-acid polyol. Reason: It converts a sustainability certificate into a measurable condition a formulator can test, and it sits upstream of the amine catalyst and chain-extender choices that fix the cure profile.

2. Specialty Amine Catalysts Take Centre Stage: Low-Emission Systems for Rigid, Molded and Slabstock Foam

1. Summary: Reporting from PU China 2026 (Shanghai, 3–5 November), published 11–12 November, frames the industry as leaving scale expansion behind for raw-material innovation and full-chain green transition. Meiside Chemical chairman Sun Yu said high-end additives remain in short supply despite ample mid- and low-end capacity, and launched ultra-low-conductivity rigid-foam and compression-resistant flexible-foam silicone stabilisers for cold-chain insulation and exported compressed mattresses. Conch Hengguang exhibited ZF10 and other new specialty amine catalysts described as supporting domestic mass production of high-end specialty polyurethane and filling a domestic technology gap. Suzhou Xiangyuan showed an HMDEA chain extender for high-transparency energy-storage protective films in electronics and photovoltaics. Evonik paired TEGOSTAB silicone surfactants with DABCO and POLYCAT amine catalysts for rigid foam in appliances, construction and cold chains, and debuted DABCO NE 1067, an ultra-low-emission catalyst, and DABCO SI 1218 LO, a low-odour surfactant for automotive molded foam targeting VDA 278; TEGOSTAB B 8273 with ORTEGOL 70X targets mattress-in-a-box recovery, and B 8292 addresses viscoelastic and molded MDI foam. BASF added Lupragen BisDMAPU, a low-emission catalyst for flexible slabstock and molded foam that supports both gelling and blowing reactions with low volatility. With HCFC-141b fully phased out this year, HFO, HFC-245fa and all-water blowing systems are forcing catalyst packages to be re-qualified, and low-odour reactive catalysts with hydroxyl functionality are gaining attention for fixing into the foam matrix and reducing final VOC.

2. Source: China Chemical Industry News (ccin.com.cn), republished by Sina Finance and 163.com, 11 Nov 2026; PlasInsight PU China 2026 show report, Nov 2026; Zacks, BASF Lupragen BisDMAPU launch. Vendor quotation pages and contact details were removed.

3. Editor’s Pick + Reason: ZF10 and DABCO NE 1067 being tied to named end-use specifications rather than generic performance claims. Reason: A domestic catalyst closing a specific technology gap and an ultra-low-emission catalyst aimed at VDA 278 are auditable qualification targets. Low-VOC and low-odour catalysts are becoming a purchasing requirement rather than a premium option.

Green chemistry continuous-flow reactor and catalyst research laboratory illustration

3. BASF Doubles Geismar MDI and Aniline Capacity as Wanhua Wins DMC Catalyst Patent

1. Summary: A Huafu Securities basic chemicals weekly published 16 November reports that BASF started up the expansion at its Geismar site in Louisiana on 11 November. The roughly 1 billion US dollar project, the company’s largest in North America, doubles site MDI capacity to around 600,000 tonnes a year and also raises aniline output. The three-phase programme began in 2018, so aniline is expanded inside an integrated chain rather than bought in. Two Chinese patent records reported 15 November show where formulation work is moving. Wanhua Chemical was granted a double metal cyanide (DMC) catalyst patent on 13 November: the slurry is aged with acid at a weight ratio of 1 to 0.001–0.004 before centrifugation and drying, using a cobalt-containing metal cyanide, and the stated benefit is lower colour in the polyether produced. Hubei Runtian Chemical published a waterborne polyurethane sizing agent application on 13 November combining 55 parts of anionic aliphatic polyurethane emulsion at 30–50 percent solids with 40–50 parts of an oxidised pectin and polyetheramine composite liquid, 1–3 parts crosslinker and 0.05–0.3 parts preservative, aimed at water resistance in surface sizing and specialty paper. A 16 November market review adds that polyurethane was among the sub-sectors with leading revenue growth in the first three quarters of 2026, although third-quarter margins were squeezed by cost and softer demand.

2. Source: Huafu Securities basic chemicals industry weekly, 10jqka, 16 Nov 2026; Wanhua Chemical DMC catalyst patent grant notice and Hubei Runtian Chemical waterborne polyurethane sizing agent application, Sina Finance, 15 Nov 2026; chemical sector earnings review, Eastmoney, 16 Nov 2026.

3. Editor’s Pick + Reason: The acid ageing window of 1 to 0.001–0.004 in the Wanhua patent. Reason: It fixes polyether colour at catalyst preparation instead of by downstream refining, which is a cheap and auditable quality lever. Read next to BASF expanding aniline alongside MDI, it shows margin being captured at the feedstock and catalyst steps rather than in the catalyst drum alone.

4. DMAP Amidation and DBU Flow Chemistry Advance Pharmaceutical Intermediate Catalysis

1. Summary: A Journal of Organic Chemistry paper (DOI 10.1021/acs.joc.6c02086, 2026, volume 91, issue 45, page 15306) from the Liu Runhui group at East China University of Science and Technology, highlighted 17 November, reports direct conversion of Cbz- and Boc-protected amines to amides with free carboxylic acids. Initial palladium-on-carbon conditions gave 25 percent amide with substantial N,N-diphenylurea; adding imidazole suppressed the urea completely and lifted yield to 70 percent, after which pyridine screening gave 85 percent and made the metal unnecessary. Standard conditions use 1.0 equivalent protected amine, 1.5 equivalents acid, 20 mole percent DMAP in diphenyl ether at about 0.6 molar, 150 degrees Celsius for 24 hours. Control experiments rule out a radical pathway, and carbon-13 labelling shows the acyl carbon comes entirely from the added acid. Separately, a technical feature published 13 November describes a modular continuous-flow platform from Fu Wai Chung’s group at City University of Hong Kong that converts the retired refrigerant R-22 into difluoromethyl azide at about 8 degrees Celsius and then into N-CF2H triazoles without isolating the explosive intermediate. A DBU-mediated 3-plus-2 cycloaddition gives 42–68 percent, and a copper tube acts as both reactor and catalyst for azide-alkyne cycloaddition across 26 substrates at 76–98 percent in 22.3 minutes. The triazole motif appears in the herbicide carfentrazone and the clinical anticoagulant milvexian.

2. Source: Journal of Organic Chemistry, DOI 10.1021/acs.joc.6c02086; organic synthesis desk report, 17 Nov 2026; technical feature on the City University of Hong Kong continuous-flow platform, Chem17, 13 Nov 2026. Catalogue and equipment vendor promotions were discarded.

3. Editor’s Pick + Reason: Imidazole suppressing the diphenylurea byproduct before pyridine catalysis took over, and DBU being used to stage a side reaction in flow. Reason: Both show heterocyclic nitrogen catalysts changing selectivity cleanly enough to remove a metal catalyst or a deprotection step, which is a directly priceable step-economy gain for peptide, amide and triazole intermediate supply.

Compiled 17 November 2026. Original illustrations, watermark-free. Dates GMT+8.

Call Us

18921336537

Email: michael@shanghaiqiguang.com

Working hours: Monday to Friday, 9:00-17:30 (GMT+8), closed on holidays
Home
Products
Contact
Search