BASF Lupragen series polyurethane catalyst

BASF Lupragen series polyurethane catalyst
Lupragen N100 N, N-dimethylcyclohexylamine DMCHA, with moderate activity, stable equilibrium catalytic performance, large adjustability, and special for hard foam; Lupragen N301 NN, N ‘, N “, N” – pentamethyldiethylenetriamine (PMDETA) to improve the fluidity of foam, strong foaming catalyst is mainly used for hard foam;
Lupragen N302 N, NN ‘, N “N” – pentamethyldipropylenetriamine, low odor, excellent opening and surface curing effect, low odor
Foam/gel equilibrium catalyst; Lupragen N204 N, N-dimethyl pie, which is beneficial to the formation of skin in the production of molded foam, is suitable for self skinning foam Lupragen TEDA triethylene diamine, and is suitable for various polyurethane foam plastics, coatings, and elastomers; Lupragen N201 is a 33% dipropylene glycol solution of trienediamine, which is suitable for various polyurethane foams, coatings and elastomers; Lupragen N202 triethylenediamine 25% 1,4-butanediol solution is suitable for BDO chain-extended microporous polyurethane elastomer and polyurethane semi-rigid foam system;
Lupragen N203 triethylenediamine 33% glycol solution, suitable for EG chain micro polyurethane elastomer and polyurethane semi-rigid foam
Department; Lupragen N105 N-methyl NMM, with good skin formation performance, is suitable for poly-cool soft foam; Lupragen N104 N-ethyl code NEM, with good skin formation performance, can expand the cell to a large extent, and is suitable for the poly-cool type soft foam Lupragen N106 2,2 ‘- dimethyl ether (DMDEE), strong foaming catalyst, suitable for the water curing system, and suitable for single-component hard foam, soft foam and adhesive;
Lupragen N103 N, N-dimethylmangamine (BDMA), good prophase fluidity, uniform cell, good adhesion, suitable for blocky
Hard blister; Lupragen N600 N, N ‘, N “- tris (dimethylaminopropyl hexahydrotriazole), a highly active trimerization catalyst with excellent foaming ability, usually
Shared with other catalysts; Lupragen N500 N, N ‘, N “- tetramethyl-1,6-hexanediamine (TMHDA), insensitive to heat, foaming/gel balanced catalyst; Lupragen N205 bis (2-dimethylamino BDMAEE), with extremely high catalytic activity and selectivity, is suitable for dry and hard foams, while Lupragen N206 bis (2-dimethylamino ether 70% dipropylene glycol solution), a standard extremely active amine catalyst, can well control the balance between foaming and gel speed, and is suitable for hard and soft foams;
Lupragen N107 Dimethylaminoethoxyethanol (DMEE/DMAEE), low odor, reactivity, suitable for rigid packaging foam, mold
Plastic soft foam, polyether soft block foam; Lupragen N109 bis (3-dimethylaminopropyl) amine (TMBPA), which promotes surface curing and reactivity, is suitable for molding soft foam, semi-rigid foam and polyether soft block foam;
Lupragen N400 N, N, N ‘- trimethylaminoethyl ethanolamine, reactive, low atomization, low pollution to PVC, especially suitable for automotive foam; Lupragen DMI 1,2-dimethylamine, gel catalyst, suitable for polyurethane rigid foam and microporous elastomer: Lupragen APIN – (3-aminopropyl) amine, suitable for semi rigid foam and soft foam;
Lupragen NMI methylamine, which can significantly improve brittleness, is suitable for hard foam and epoxy curing agent:
Lupragen N401N, N, N ‘, N’ – tetramethyl-44 ‘- diaminodicyclohexylmethane, suitable for dry and soft foam: Lupragen DMEA N, N-dimethylethanolamine, mild balance, short milking time, low activity, high and moderate ability, suitable for soft foam
Foam: Lupragen N801 N, N-diethylethanolamine, suitable for soft foam; Lupragen N700 1,8 ‘- diazabicyclo-5,4,0undecen-7 (DBU), strong activity, low odor, gel catalyst, suitable for
Whole skin foam and microporous elastomer; Lupragen N501 NN, N ‘, N’ – tetramethyl-1,3-propylamine (TMPDA), auxiliary catalyst, suitable for polyurethane foam microporous elastomer;