PC-5

PC-5

Section 1: Chemical Product and Company Identification

1.1 Product Name:
Pentamethyldiethylenetriamine (PMDETA)

Catalog Codes: Not available.

CAS#: 3030-47-5

RTECS: Not available.

TSCA: Not available.

Chemical Formula: C9H23N3

1.2 Contact Information:
Shanghai Qiguang Industry and Trade co., LTD
Floor 5, qigang building, 581 yanchang middle road,
District, Shanghai, China.
Sales: +86-21-56777378
International Sales: +86-21-56777378
Order Online: www.51qiguang.com

CHEMTREC (24HR Emergency Telephone), call:
+86-21-56777378

International CHEMTREC, call: +86-21-56777378

DC PC-5
Description
DC PC-5 is a tertiary amine which strongly promotes the urea reaction in a variety of rigid and flexible polyurethane foam applications.

Applications
DC PC-5 is very effective in MDI based pour-in-place polyurethane systems such as rigid appliance. It is also used in conjunction with a trimer catalyst in PIR laminate boardstock formulations.
DC PC-5 can also be used in TDI, TDI/MDI and MDI high resiliency (HR) flexible molded foams as well as integral skin and microcellular systems.

Shelf Life:
24 Months

Standard Packaging:
 170KG Steel Drum
 IBC Drum is recommended.

Items Spec
Content，Wt% 98 min
Moisture，Wt% 0.5 max

Typical Properties
Appearance Light yellowish Liquid
Foreign Matter Free of foreign matter
Relative Density(Water=1) Ca.0.85
Boiling Point@760 mmHg,0c 201
Water solubilty Completely Soluble
Storage Information
Qiguang Group recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30° C. Lower and higher storage temperatures are not preferable and should be avoided.

Section 2: Hazards Identification

2.1 Classification of the substance or mixture
GHS Classification and Labeling: Follow GB 13690,
GB 15258 and GB 30000.2 to GB 30000.29 (GHS 2011)
Flammable liquids, Category 4 H227: Combustible liquid.
Acute toxicity, Category 4 H302: Harmful if swallowed.
Acute toxicity, Category 3 H331: Toxic if inhaled.
Acute toxicity, Category 3 H311: Toxic in contact with skin.
Skin corrosion, Category 1B H314: Causes severe skin burns and eye damage.
Serious eye damage, Category 1 H318: Causes serious eye damage.
Acute aquatic toxicity, Category 3 H402: Harmful to aquatic life.
Chronic aquatic toxicity, Category 3 H412: Harmful to aquatic life with long lasting effects.
2.2 Label elements
GHS Classification and Labeling: Follow GB 13690, GB 15258 and GB 30000.2 to GB 30000.29 (GHS 2011)
Hazardous products which must be listed on the label:
CAS-No. 3030-47-5 NT CAT PC-5
Pictogram
Signal word :Danger
Hazard statements H227 Combustible liquid.
– H302 Harmful if swallowed.
– H311 + H331 Toxic in contact with skin or if inhaled.
– H314 Causes severe skin burns and eye damage.
– H412 Harmful to aquatic life with long lasting effects.
Precautionary statements General
– None
Prevention
– P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
– P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
– P264 Wash skin thoroughly after handling.
– P270 Do not eat, drink or smoke when using this product.
– P271 Use only outdoors or in a well-ventilated area.
– P273 Avoid release to the environment.
– P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response – P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell.
– P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
– P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
– P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
– P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
– P310 Immediately call a POISON CENTER or doctor/ physician.
– P361 + P364 Take off immediately all contaminated clothing and wash it before reuse.
– P363 Wash contaminated clothing before reuse.
– P370 + P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.

Storage
– P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
– P403 + P235 Store in a well-ventilated place. Keep cool.
– P405 Store locked up.
Disposal
– P501 Dispose of contents/ container to an approved waste disposal plant.

2.3 Other hazards which do not result in classification
None known.

Section 3: Composition/Information On Ingredients

3.1 Substance
– Synonyms Pentamethyl Diethylene Triamine
Chemical Name CAS-No. Identification number GHS Classification Concentration [%]
NT CAT PC-5 3030-47-5
Not applicable
Flammable liquids , Category 4 ; H227
Acute toxicity , Category 4 ; H302
Acute toxicity , Category 3 ; H331
Acute toxicity , Category 3 ; H311
Skin corrosion , Category 1B ; H314
Serious eye damage , Category 1 ; H318
Acute aquatic toxicity , Category 3 ; H402
Chronic aquatic toxicity , Category 3 ; H412 >= 95 – < 99

For the full text of the H-Statements mentioned in this Section, see Section 16.
3.2 Mixture
– Not applicable, this product is a substance.

Section 4: First Aid Measures

4.1 Description of first aid measures
General advice
– Show this safety data sheet to the doctor in attendance.
– First aider needs to protect himself.
– Place affected clothing in a sealed bag for subsequent decontamination.
– Plan first aid action before beginning work with this product.
In case of inhalation
– Move to fresh air.
– Oxygen or artificial respiration if needed.
– Call a physician or poison control centre immediately.
In case of skin contact
– Take off contaminated clothing and shoes immediately.
– After contact with skin, first remove product with a dry cloth and then wash the skin with plenty of water.
– If symptoms persist, call a physician.
In case of eye contact
– Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
– Get immediate medical advice/ attention.
In case of ingestion
– Do NOT induce vomiting.
– Rinse mouth with water.
– Give small amounts of water to drink.
– Never give anything by mouth to an unconscious person.
– Get immediate medical advice/ attention.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms
– Skin contact may provoke the following symptoms:
– corrosive effects
– Ingestion may provoke the following symptoms:
– Nausea
Effects
– Skin contact may aggravate existing skin disease
– Inhalation of product may aggravate existing chronic respiratory problems such as asthma, emphysema or bronchitis
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician
– All treatments should be based on observed signs and symptoms of distress in the patient. Consideration should be given to the possibility that overexposure to materials other than this product may have occurred.
– There is no specific antidote available.

Section 5: Fire and Explosion Data

5.1 Extinguishing media
Suitable extinguishing media
– Water spray
– Foam
– Multi-purpose powders
– Carbon dioxide (CO2)
Unsuitable extinguishing media
– High volume water jet
5.2 Special hazards arising from the substance or mixture
Specific hazards during firefighting
– Hazardous decomposition products formed under fire conditions.
– Carbon dioxide (CO2)
– Carbon monoxide
– Nitrogen oxides (NOx)
– Corrosive or suffocating vapours are released.
– Highly irritating vapours are released.
– Harmful or toxic vapours are released.
Hazardous combustion products:
– On combustion or on thermal decomposition (pyrolysis) releases:
– Nitrogen oxides (NOx)
– Carbon oxides
5.3 Advice for firefighters
Special protective equipment for firefighters
– Self-contained breathing apparatus (EN 133)
– Full protective suit
Specific fire fighting methods
– Cool down the containers/equipment exposed to heat with a water spray. Ensure that there is NO direct contact between the water and the product.
– Do not use a solid water stream as it may scatter and spread fire.
– Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Further information
– In the event of fire and/or explosion do not breathe fumes.
– Standard procedure for chemical fires.
– Use a water spray to cool fully closed containers.

Section 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures
– Use personal protective equipment.
– Avoid contact with the skin and the eyes.
– Stop the leak. Turn leaking containers leak-side up to prevent the escape of liquid.
– For accidental release measures for each mixture refer to attached material safety data sheets.
6.2 Environmental precautions
– Dam up.
– Prevent product from entering sewage system.
– Do not flush into surface water or sanitary sewer system.
– Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems.
6.3 Methods and materials for containment and cleaning up
Methods for containment
– Stop leak if safe to do so.
– Dam up with sand or inert earth (do not use combustible materials).
Recovery
– Absorb the product onto porous material.
– Shovel into suitable container for disposal.
– Non-sparking tools should be used.
Decontamination/cleaning
– Clean contaminated surface thoroughly.
– Recover the cleaning water for subsequent disposal.
Disposal
– Dispose of in accordance with local regulations.
Additional advice
– The product should not be allowed to enter drains, water courses or the soil.
6.4 Reference to other sections
– 7. HANDLING AND STORAGE
– 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
– 13. DISPOSAL CONSIDERATIONS

Section 7: Handling and Storage

7.1 Precautions for safe handling
– Provide sufficient air exchange and/or exhaust in work rooms.
– Earth the equipment.
– Prevent the build-up of electrostatic charge.
– Avoid dust formation.
– Keep away from heat.
– Keep away from fire, sparks and heated surfaces.
– Routine housekeeping should be instituted to ensure that dusts do not accumulate on surfaces.
– Handle in accordance with good industrial hygiene and safety practice.
Hygiene measures
– Ensure that eyewash stations and safety showers are close to the workstation location.
– Regular cleaning of equipment, work area and clothing.
– Use clean, well-maintained personal protection equipment.
– Wash hands before breaks and at the end of workday.
– When using do not eat, drink or smoke.
7.2 Conditions for safe storage, including any incompatibilities
Technical measures/Storage conditions
– Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems.
– Stable under normal conditions.
– Keep in a dry, cool and well-ventilated place.
– Store in original container.
– Keep tightly closed.
– Keep away from open flames, hot surfaces and sources of ignition.
– Keep away from combustible material.
– Keep away from incompatible materials to be indicated by the manufacturer
– Keep away from: Do not mix with incompatible materials (See list section 10).
Packaging material
Suitable material
– Plastic drum
Requirements for storage rooms and vessels
– Keep tightly closed in a dry, cool and well-ventilated place.
7.3 Specific end use(s)
– no data available

Section 8: Exposure Controls/Personal Protection

8.1 Control parameters
– We are not aware of any national exposure limit.
8.2 Exposure controls
Control measures
Engineering measures
– Effective exhaust ventilation system
Individual protection measures
Respiratory protection
– Use a respirator with an approved filter if a risk assessment indicates this is necessary.
Hand protection
– Impervious gloves
– Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.
– Gloves must be inspected prior to use.
Eye protection
– Tightly fitting safety goggles
– Safety glasses with side-shields
Skin and body protection
– impervious clothing
– Safety shoes
– Choose body protection according to the amount and concentration of the dangerous substance at the work place.
– Remove and wash contaminated clothing before re-use.
Hygiene measures
– Ensure that eyewash stations and safety showers are close to the workstation location.
– Regular cleaning of equipment, work area and clothing.
– Use clean, well-maintained personal protection equipment.
– Wash hands before breaks and at the end of workday.
– When using do not eat, drink or smoke.
Protective measures
– The protective equipment must be selected in accordance with current CEN standards and in cooperation with the supplier of the protective equipment.
– Selection of appropriate personal protective equipment should be based on an evaluation of the performance characteristics of the protective equipment relative to the task(s) to be performed, conditions present, duration of use, and the potential hazards and/or risks that may occur during use.
Environmental exposure controls
– Dam up.
– Prevent product from entering sewage system.
– Do not flush into surface water or sanitary sewer system.
– Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems.

Section 9: Physical and Chemical Properties

9.1 Information on basic physical and chemical properties
Appearance Form:
liquid
Physical state:
liquid (20 °C)
Odour :no data available
Odour Threshold :no data available
pH :no data available
Flash point ca. 67 °C closed cup
Method: according to a standardised method
Evaporation rate (Butylacetate = 1) :no data available
Flammability (solid, gas) :no data available
Flammability (liquids) :no data available
Flammability/Explosive limit :no data available
Auto-ignition temperature :no data available
Vapour pressure :no data available
Vapour density :no data available
Density ca. 0.83 g/cm3
Solubility :no data available
Partition coefficient: n-octanol/water :no data available
Thermal decomposition :no data available
Viscosity :no data available
Explosive properties :no data available
Oxidizing properties :no data available
9.2 Other information
no data available

Section 10: Stability and Reactivity Data

10.1 Reactivity
– Stable at normal ambient temperature and pressure.
10.2 Chemical stability
– Stable under normal conditions.
– Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
– No dangerous reaction known under conditions of normal use.
10.4 Conditions to avoid
– Extremes of temperature and direct sunlight.
– Heat, flames and sparks.
– Prevent the build-up of electrostatic charge.
– Keep away from heat and sources of ignition.
10.5 Incompatible materials
– Strong oxidizing agents
– Strong reducing agents
– Strong acids and strong bases
10.6 Hazardous decomposition products
– On combustion or on thermal decomposition (pyrolysis) releases:
– (Carbon oxides (CO + CO2)).
– Nitrogen oxides (NOx)

Section 11: Toxicological Information

11.1 Information on toxicological effects
Acute toxicity
Acute oral toxicity
bis(2-dimethylaminoethyl)(methyl)amine LD50 : 1,330 mg/kg – Rat , male and female
Method: according to a standardised method
This product is classified as acute toxicity, category 4
Unpublished reports
Acute inhalation toxicity
bis(2-dimethylaminoethyl)(methyl)amine LC50 – 6 h ( vapour ) : 2.06 mg/l – Rat , male and female
Method: OECD Test Guideline 403
This product is classified as acute toxicity, category 3
Unpublished report
Acute dermal toxicity
bis(2-dimethylaminoethyl)(methyl)amine LD50 : 200 – 1,000 mg/kg – Rabbit , male and female
Method: OECD Test Guideline 402
This product is classified as acute toxicity, category 3
Occlusive
Unpublished reports
Acute toxicity (other routes of administration) no data available
Skin corrosion/irritation
bis(2-dimethylaminoethyl)(methyl)amine
Rabbit
Corrosive after 3 minutes to 1 hour of exposure
Method: according to a standardised method
Occlusive
Unpublished reports
Serious eye damage/eye irritation
bis(2-dimethylaminoethyl)(methyl)amine Rabbit
Irreversible effects on the eye
Method: according to a standardised method
Unpublished reports
Respiratory or skin sensitisation
bis(2-dimethylaminoethyl)(methyl)amine Buehler Test – Guinea pig
Does not cause skin sensitisation.
Method: OECD Test Guideline 406
Unpublished reports
Local lymph node assay – Mouse
Does not cause skin sensitisation.
Method: OECD Test Guideline 429
Unpublished reports
Mutagenicity
Genotoxicity in vitro
bis(2-dimethylaminoethyl)(methyl)amine Chromosome aberration test in vitro
Strain: Human lymphocytes
with and without metabolic activation
negative
Method: OECD Test Guideline 473
Unpublished reports
Gene mutation assays in mammalian cells.
Strain: mouse lymphoma cells
with and without metabolic activation
negative
Method: OECD Test Guideline 476
Unpublished reports
Ames test
with and without metabolic activation
negative
Method: OECD Test Guideline 471
Unpublished reports
Genotoxicity in vivo no data available
Carcinogenicity no data available
Toxicity for reproduction and development
Toxicity to reproduction/Fertility
bis(2-dimethylaminoethyl)(methyl)amine Reproduction/developmental toxicity screening test – Rat , male and female
Oral
NOAEL parent: 300 mg/kg
NOAEL F1: 100 mg/kg
Method: OECD Test Guideline 422
no impairment of fertility has been observed
Unpublished reports
Developmental Toxicity/Teratogenicity
bis(2-dimethylaminoethyl)(methyl)amine Rat , male and female
Application Route: Oral
NOAEL teratogenicity: 100 mg/kg
NOAEL maternal: 30 mg/kg
Method: OECD Test Guideline 422
Developmental toxicity was observed in the presence of maternal toxicity.
Unpublished reports
A testing proposal has been submitted to ECHA.
STOT
STOT – single exposure
bis(2-dimethylaminoethyl)(methyl)amine The substance or mixture is not classified as specific target organ toxicant, single exposure.
internal evaluation
STOT – repeated exposure
bis(2-dimethylaminoethyl)(methyl)amine The substance or mixture is not classified as specific target organ toxicant, repeated exposure.
internal evaluation
bis(2-dimethylaminoethyl)(methyl)amine Oral 42 Days – Rat , male and female
NOAEL: 30 mg/kg
Method: OECD Test Guideline 422
Symptoms: Liver disorders
Gavage
The significance of these findings for humans is not certain.
Unpublished reports
A testing proposal has been submitted to ECHA.
inhalation (vapour) 14 Days – Rat , male and female
LOAEC: 3 ppb(m)
Target Organs: Upper respiratory tract, Skin, Cornea
Method: according to a standardised method
Symptoms: Local irritation
Unpublished reports
Aspiration toxicity no data available

Section 12: Ecological Information

12.1 Toxicity
Aquatic Compartment
Acute toxicity to fish
bis(2-dimethylaminoethyl)(methyl)amine LC50 – 96 h : 157 mg/l – Oncorhynchus mykiss (rainbow trout)
static test
Analytical monitoring: yes
Method: OECD Test Guideline 203
Not harmful to fish (LC50 > 100 mg/L)
Fresh water
Unpublished reports
Acute toxicity to daphnia and other aquatic invertebrates.
bis(2-dimethylaminoethyl)(methyl)amine EC50 – 48 h : 54.9 mg/l – Daphnia magna (Water flea)
static test
Analytical monitoring: yes
Method: Directive 67/548/EEC, Annex V, C.2.
Fresh water
Not harmful to aquatic invertebrates. (EC50 > 100 mg/L)
Unpublished reports
Toxicity to aquatic plants
bis(2-dimethylaminoethyl)(methyl)amine ErC50 – 72 h : 78.3 mg/l – Desmodesmus subspicatus (green algae)
static test
Analytical monitoring: yes
Growth rate
Unpublished reports
Harmful to algae.
NOEC – 72 h : 42 mg/l – Desmodesmus subspicatus (green algae)
static test
Analytical monitoring: yes
Fresh water
Unpublished reports
No adverse chronic effect observed up to and including the threshold of 1 mg/L.
Toxicity to microorganisms
bis(2-dimethylaminoethyl)(methyl)amine NOEC – 30 min : 1,000 mg/l – activated sludge
static test
Analytical monitoring: no
Method: OECD Test Guideline 209
Unpublished reports
12.2 Persistence and degradability
Abiotic degradation
Stability in water
bis(2-dimethylaminoethyl)(methyl)amine Stable, Unpublished reports
Biodegradation
Biodegradability
bis(2-dimethylaminoethyl)(methyl)amine Ready biodegradability study:
Method: OECD Test Guideline 301 E
< 10 % – 28 Days
The substance does not fulfill the criteria for ready biodegradability and ultimate aerobic biodegradability
Dissolved organic carbon (DOC)
Inoculum: activated sludge
Unpublished reports
Inherent biodegradability study
Method: OECD Test Guideline 302 B
1 % – 28 Days
The substance does not fulfill the criteria for inherent biodegradability
Dissolved organic carbon (DOC)
Inoculum: activated sludge
Conc. in standard unit mg/l: 400 mg/l
Unpublished reports
Degradability assessment
bis(2-dimethylaminoethyl)(methyl)amine The product is not considered to be rapidly degradable in the environment
12.3 Bioaccumulative potential
Partition coefficient: n-octanol/water
bis(2-dimethylaminoethyl)(methyl)amine Not potentially bioaccumulable
Bioconcentration factor (BCF)
bis(2-dimethylaminoethyl)(methyl)amine
Bioconcentration factor (BCF): 3.16
Not potentially bioaccumulable
Structure-activity relationship (SAR)
Bioconcentration factor (BCF)
bis(2-dimethylaminoethyl)(methyl)amine Bioconcentration factor (BCF): 3.16
Not potentially bioaccumulable
Structure-activity relationship (SAR)
12.4 Mobility in soil
Adsorption potential (Koc)
bis(2-dimethylaminoethyl)(methyl)amine Adsorption/Soil
Koc: 36.53
Structure-activity relationship (SAR)
12.5 Results of PBT and vPvB assessment
bis(2-dimethylaminoethyl)(methyl)amine This substance is not considered to be persistent, bioaccumulating and toxic (PBT). This substance is not considered to be very persistent and very bioaccumulating (vPvB).
12.6 Other adverse effects no data available
Ecotoxicity assessment
Acute aquatic toxicity
bis(2-dimethylaminoethyl)(methyl)amine Harmful to aquatic life.
Chronic aquatic toxicity
bis(2-dimethylaminoethyl)(methyl)amine Harmful to aquatic life with long lasting effects.

Section 13: Disposal Considerations

13.1 Waste treatment methods
Product Disposal
Prohibition
– Avoid release to the environment.
– The product should not be allowed to enter drains, water courses or the soil.
– Dispose of as hazardous waste in compliance with local and national regulations.
– Do not dispose of with domestic refuse.
Advice on cleaning and disposal of packaging
– Empty the packaging completely prior to disposal.
– Dispose of contents/ container to an approved waste disposal plant.
– Dispose of as hazardous waste in compliance with local and national regulations.
Measure for waste avoidance or recovery
– Do not dispose of the product at a rubbish tip

Section 14: Transport Information

CN_DG
14.1 UN number UN 2264
14.2 Proper shipping name CORROSIVE LIQUID, TOXIC, N.O.S. (Pentamethyl diethylene triamine)
14.3 Transport hazard class
Subsidiary hazard class:
Label(s): 8
6.1
8 (6.1)
14.4 Packing group
Packing group
II
14.5 Environmental hazards
14.6 Special precautions for user For personal protection see section 8.
ADR
14.1 UN number UN 2264
14.2 Proper shipping name CORROSIVE LIQUID, TOXIC, N.O.S. (Pentamethyl diethylene triamine)
14.3 Transport hazard class
Subsidiary hazard class:
Label(s): 8
6.1
8 (6.1)
14.4 Packing group
Packing group
Classification Code
II
CT1
14.5 Environmental hazards NO
14.6 Special precautions for user
Tunnel restriction code
Hazard Identification Number:
(E)
86

For personal protection see section 8.
RID
14.1 UN number UN 2264
14.2 Proper shipping name CORROSIVE LIQUID, TOXIC, N.O.S. (Pentamethyl diethylene triamine)
14.3 Transport hazard class
Subsidiary hazard class:
Label(s): 8
6.1
8 (6.1)
14.4 Packing group
Packing group
Classification Code
II
CT1
14.5 Environmental hazards NO
14.6 Special precautions for user
Hazard Identification Number:
86
For personal protection see section 8.
IMDG
14.1 UN number UN 2264
14.2 Proper shipping name

IMDG Code segregation group CORROSIVE LIQUID, TOXIC, N.O.S. (Pentamethyl diethylene triamine)
NR Not Relevant
14.3 Transport hazard class
Subsidiary hazard class:
Label(s): 8
6.1
8 (6.1)
14.4 Packing group
Packing group
II
14.5 Environmental hazards NO
14.6 Special precautions for user
EmS
For personal protection see section 8.
F-A , S-B
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
no data available
IATA
14.1 UN number UN 2264
14.2 Proper shipping name
CORROSIVE LIQUID, TOXIC, N.O.S. (Pentamethyl diethylene triamine)
14.3 Transport hazard class
Subsidiary hazard class:
Label(s): 8
6.1
8 (6.1)
14.4 Packing group
Packing group

Packing instruction (cargo aircraft)
Max net qty/pkg
Packing instruction (passenger aircraft)
Max net qty/pkg
II

855
30.00 L
851
1.00 L
14.5 Environmental hazards NO
14.6 Special precautions for user
For personal protection see section 8.

Note: The above regulatory prescriptions are those valid on the date of publication of this sheet. Given the possible evolution of transport regulations for hazardous materials, it would be advisable to check their validity with your sales office.

Section 15: Other Regulatory Information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Following last version of regulations are applicable for the chemical classification, SDS and label:
– General Rule for classification and hazard communication of chemicals, GB 13690
– Series standards of Safety rules for classification, precautionary labeling and precautionary statements of chemicals, GB 30000.2~GB 30000.29
– General rules for preparation of precautionary label for chemicals, GB 15258
– Safety data sheet for chemical products—Content and order of sections, GB/T 16483

Section 16: Other Information
References: Not available.

Other Special Considerations: Not available.